Intro to Ramps and Leads – Part 44 – Vectric For Absolute Beginners
More down here ↓↓↓ Click SHOW MORE!
This is the 44th in a series of videos geared toward the person who has never worked with CAD or CAM in the Vectric Software before.
I’d like to thank Ahmad Eivaz for allowing me to use his photos in this video. Thank you, Ahmad!
In this video, I’ll introduce you to Ramps and Leads in Cut2D Desktop, Cut2D Pro, VCarve Desktop, VCarve Pro, and Aspire.
I’ll show you what Ramps and Leads are, then give you a couple of examples of when you would want to use them. We’ll get into some Profile toolpaths, and get into the various settings we have available to us for adding a Ramp, a Lead, or a combination of the two. I’ll then demonstrate the toolpaths and Preview a couple of them to show you a few things to watch out for when adding Leads to a toolpath. Finally, I’ll show you a common error message that you might run into, how to fix that error, then recalculate the toolpath. Please keep in mind that this is an Intro to Ramps and Leads. There are many other options and settings to be explored, but this will give you an overall view of what Ramps and Leads can do for you.
As usual, if you have any comments or questions about anything I covered in this video, please put ‘em in the comment section below.
On Sunday, May 24th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: https://youtu.be/CinfOf7BQyM
Thanks for watching!
Link to The Trampled Underfoot Podcast. “Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What’s the show about? About an hour…”
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: https://trampledunderfootpodcast.com/
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
If you’d like to support my channel and help with the making of future videos, you can donate by using any of the following links:
StreamLab : https://streamlabs.com/marklindsaycnc
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner #NotSponsored